Transportbandsskarvning.

Material för kallvulk Material för varmvulk Material för varmvulk WK Mekaniska skarvelement

  • BELT PLANE DEVICE FOR FRAME TS

    Belt plane devices. Planing is recommended for cover rubber thicknesses over 2 mm. The planer allows accurate planing of rubber covers with minimal effort. Planing provides a proven advantage: the belt fasteners are recessed in the belt cover thereby reducing or avoiding the risk of damage to belt fasteners scrapers rollers drive pulleys or tail pulleys.. Belt plane device for frames TS TTN + TTE system (5 - 20 mm).

    Läs mer

  • Bolt breaker

    Bolt breaker. The bolt breakers are used to break off protruding screw ends. They are used in pairs for safe and convenient handling.. Bolt breaker 1-140-190.

    Läs mer

  • Connecting pin TT10 S

    Connecting pin TT10 S. Sheathed stainless steel wire pin Sheath: chrome steel Min. diameter 5.3 mm . Connecting pin TT10 S Belt width 800.

    Läs mer
  • Platshållare

    Cover rubber uncured

    Ovulkat gummi av hög kvalitet för att täcka ovan- och undersida vid transportbandsskarvning.

    Läs mer
  • Platshållare

    Cover rubber HR uncured

    Cover rubber HR uncured. Yellow protection foil (poly). Heat resistant up to max. 110 °C short peaks up to 130 °C. . Heat resistant. 1 Polymer basis DIN ISO 1629 BR/IR 2 Specific weight DIN EN ISO 1183-1 1.11 g/cm³ 3 Hardness DIN ISO 7619-1 60 Shore A 10 Colour Black . Cover rubber HR uncured.

    Läs mer
  • Platshållare

    Cover rubber sheeting STB uncured

    Cover rubber sheeting STB uncured. Provides the following properties: compatible with conveyor belt according to DIN 2231 X Y W and DIN EN ISO 15236 H D L Green protection foil. Other thicknesses on request. 1 Polymer basis DIN ISO 1629 NR/IR/BR 2 Specific weight DIN EN ISO 1183-1 1.11 g/cm³ 3 Hardness DIN ISO 7619-1 63 Shore A 10 Colour Black . Cover rubber sheeting STB uncured.

    Läs mer
  • Platshållare

    COVER RUBBER V UNCURED 2x500x7000mm

    Cover rubber V uncured. Gray protection foil (poly). German underground approval: LOBA NW No.: 18.43.21-63-7. Self-extinguishing antistatic and moderate oil resistance. 1 Polymer basis DIN ISO 1629 CR 2 Specific weight DIN EN ISO 1183-1 1.39 g/cm³ 3 Hardness DIN ISO 7619-1 60 Shore A 4 Electric resistance Antistatic* *Surface and volume resistivity < 1 x 10^6 Ohm tested in accordance with DIN IEC 93 / VDE 0303 part 30. 10 Colour Black . Cover rubber V uncured.

    Läs mer

  • Cover strip

    Cover strip. For cold splices on carrying and pulley side.. 1 Polymer basis DIN ISO 1629 SBR 2 Specific weight DIN EN ISO 1183-1 1.14 g/cm³ 3 Hardness DIN ISO 7619-1 64 Shore A 10 Colour Black . Cover strip.

    Läs mer

  • Filler rubber

    Uppbyggnadsgummi med CN-skikt på båda sidor.

    Läs mer

  • HAMMER PIN DRIVER for connecting pins

    Hammer pin driver. Hammer pin driver for connecting pins.

    Läs mer

  • HAND WRENCH THS

    Hand wrench THS. Hand wrench for screwing in TT SG connecting pins.. Hand wrench THS.

    Läs mer
  • Platshållare

    Intermediate rubber (tie gum) uncured

    Intermediate rubber (tie gum) uncured. Intermediate rubber (tie gum) V. Green protection foil (poly). German underground approval: LOBA NW No.: 18.43.21-63-7.

    Läs mer